Pastel Pad 4 colours Signature 180gsm 12 Sheet A5
- Â colours; cream, gold, green and pink
- 180gsm
- 12 Sheets which are tape bound
- 2mm (0.08in) thick backing board
- Practical tips on the inside cover
- Available in A3, A4 and A5
- Mont Marte Charcoal Products
- Mont Marte Graphite Products
- Mont Marte Coloured Pencils
- Mont Marte Pastel Pencils
- Mont Marte Skin Tints
- Mont Marte Soft Pastels
- Mont Marte Oil Pastels
Pastel Pad 4 colours Signature 180gsm 12 Sheet A4
- 4 colours; cream, gold, green and pink
- 180gsm
- 12 Sheets which are tape bound
- 2mm (0.08in) thick backing board
- Practical tips on the inside cover
- Available in A3, A4 and A5
- Mont Marte Charcoal Products
- Mont Marte Graphite Products
- Mont Marte Coloured Pencils
- Mont Marte Pastel Pencils
- Mont Marte Skin Tints
- Mont Marte Soft Pastels
- Mont Marte Oil Pastels
Pastel Pad 4 colours Signature 180gsm 12 Sheet A3
- 4 colours; cream, gold, green and pink
- 180gsm
- 12 Sheets which are tape bound
- 2mm (0.08in) thick backing board
- Practical tips on the inside cover
- Available in A3, A4 and A5
- Mont Marte Charcoal Products
- Mont Marte Graphite Products
- Mont Marte Coloured Pencils
- Mont Marte Pastel Pencils
- Mont Marte Skin Tints
- Mont Marte Soft Pastels
- Mont Marte Oil Pastels
Make n Bake Polymer Clay Signature 60g – Metallic Green
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Make n Bake Polymer Clay Signature 60g – Metallic Blue
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Make n Bake Polymer Clay Signature 60g – Metallic Mauve
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Make n Bake Polymer Clay Signature 60g – Metallic Pink
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Make n Bake Polymer Clay Signature 60g – Metallic Red
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Make n Bake Polymer Clay Signature 60g- Chrome
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Gloss Clay Varnish Signature 120ml
- Seals, protects and strengthens clay
- Suitable for polymer or air hardening clay
- Dries to a hard transparent, high gloss finish
- Water-proof formula great for DIY plant pots and more
- Enhances paint colour underneath and surface appearance
Directions:
- Apply varnish in thin layers using a soft taklon brush, allowing approx. 30mins to dry between applications
- Note: may have a slight tacky touch on polymer projects due to plasticiser in clay
Modelling Tools Signature 6pc
- The large triangular tool defines wide inclined areas. Shape and position features with the flat round end.
- This sharp angled ribbon tool carves out clay in hard to reach places. The wooden tool end incises fine lines.
- Create uniform indentations with the curved ribbon blade. Produce level surfaces with the wide flat paddle tool.
- Remove clay and form even shapes with the ribbon tool. Make fine details and texture with the flat rounded end.
- Use this small flat ribbon tool to cut and level clay. The wooden end shapes, smoothes and carves.
- Define large areas and regulate clay thickness with this ribbon tool. Slice small objects and make linear marks with the wide wooden end.
Clay Tool Set Signature 11pc
- Carve, cut and smooth with the curved end. The Spearhead end cuts small straight lines and is perfect for creating fine details.This small metal brush creates multiple fine textured marks.
- Remove clay in square in large flat areas with the open loop end. Carve, cut and smooth with the curved end.
- These tool ends are the perfect size for hand drilling holes for salt and pepper shakers in green ware.
- The needle point end is ideal for placing delicate objects or scratching in fine details. Carve, cut and smooth with the curved end.
- This tool is often referred to as a spoolie. It is great for cleaning rough spots on green ware in delicate or hard to reach places.
- The curved tool has a small sharp blade which is great for removing small areas with straight edges. The angled end is great for cutting small detailed areas.
- The angled tool is invaluable for flattening areas in hard to reach places. The needle point can create small holes, texture marks or can assist in placement of small objects.
- Use the slightly forked end to create wood like texture or sgraffito effects. Spearhead ends cuts small straight lines and etches fine details.
- The curved blade with the flat end lifts small areas with straight edges. Use the slightly forked end to create wood like texture or sgraffito effects.
- The curved blade cuts, carves and smoothes clay. The large spearhead blade is great for deepening details and making longer cuts.
