Click to enlarge
Oil Pastels Signature 24pc KSh700.00
Back to products
Air Hardening Modelling Clay Premium 500g- White KSh450.00

Pottery Tool Kit Signature 10pc

KSh800.00

  • Potters Rib: This wooden tool creates uniform curves when wheel throwing.
  • Modelling Tool: Suitable for shaping, smoothing and sculpting clay.
  • Large Ribbon Tool: This tool has a large curved blade to shape and carve.
  • Sponge: Soak in water and use on your clay piece to prevent it from drying out.
  • Needle Tool: This tool is great for placing delicate objects, making small holes and scratching fine details.
  • Double Loop Tool: This tool has one curved loop and one flat loop to carve smaller areas of clay.
  • Metal Scraper: This metal blade can be used to add finishing touches to pottery pieces or to slice thin strips of clay.
  • Wire Clay Cutter: This wired is used to cut and portion blocks of clay easily. Also great to remove finished pieces from the pottery wheel head.
  • Fettling Knife: This tool has a long sharp flexible blade for sculpting, scraping and cutting clay.
  • Vinyl Case: Keeps your Pottery Set neatly and conveniently together.
Compare
Add to wishlist
Categories: ,
Description

The Mont Marte Pottery Tool Kit is an excellent set of essentials for pottery enthusiasts. They feature stained wooden handles and are constructed with quality steel fittings. These tools are suitable for wheel throwing and hand building from small to large clay objects. Clean tools with water after use and allow to dry. Tools may be lightly oiled with linseed oil to prevent metal rusting or wood cracking.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Pottery Tool Kit Signature 10pc”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Compare

Spray Paint -White

,
KSh250.00
  • Quick-drying thermoplastic acid.
  • Easy to operate
  • The paint coating is quick drying hard, thick and has an excellent luster adhesion, toughness and shock-resistance.
  • Colors are good for decoration, with protection of surfaces
  • Widely used for the protecting decoration of the surfaces of metal, glass and ABS plastics
Add to wishlist
Add to cart
Quick view
Compare

Make n Bake Polymer Clay Signature 60g – Metallic Mauve

,
KSh300.00
  • Available in a range of bright colours
  • Soft and smooth, makes it easy to knead, blend colours and join edges
  • Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
  • Ideal for press moulds, pattern making, canes, beading jewellery
  • Once cured can be drilled, sanded, cut
  • Compact 60 g size great for adding many colours to your collection
  • Non toxic

Directions:

  • Knead until smooth
  • Create your sculpture
  • Preheat oven to 120-130 degrees c and bake for 30 mins
  • Carefully remove from oven and let it cool

Handy Hints:

  • Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
  • Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
  • Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
  • Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
  • Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
  • Do not use a microwave with polymer clay
  • Hardened clay will accept additional layers of clay over it and can be re-baked
  • Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
  • Keep packaging for future reference

Techniques:

  • Mica Shift
  • Skinner Blend
  • Mokume Gane
Add to wishlist
Add to cart
Quick view
Compare

Make n Bake Polymer Clay Signature 60g- Chrome

,
KSh300.00
  • Available in a range of bright colours
  • Soft and smooth, makes it easy to knead, blend colours and join edges
  • Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
  • Ideal for press moulds, pattern making, canes, beading jewellery
  • Once cured can be drilled, sanded, cut
  • Compact 60 g size great for adding many colours to your collection
  • Non toxic

Directions:

  • Knead until smooth
  • Create your sculpture
  • Preheat oven to 120-130 degrees c and bake for 30 mins
  • Carefully remove from oven and let it cool

Handy Hints:

  • Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
  • Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
  • Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
  • Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
  • Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
  • Do not use a microwave with polymer clay
  • Hardened clay will accept additional layers of clay over it and can be re-baked
  • Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
  • Keep packaging for future reference

Techniques:

  • Mica Shift
  • Skinner Blend
  • Mokume Gane
Add to wishlist
Add to cart
Quick view
Compare

Clay Tool Set Signature 11pc

,
KSh1,000.00
  • Carve, cut and smooth with the curved end. The Spearhead end cuts small straight lines and is perfect for creating fine details.This small metal brush creates multiple fine textured marks.
  • Remove clay in square in large flat areas with the open loop end. Carve, cut and smooth with the curved end.
  • These tool ends are the perfect size for hand drilling holes for salt and pepper shakers in green ware.
  • The needle point end is ideal for placing delicate objects or scratching in fine details. Carve, cut and smooth with the curved end.
  • This tool is often referred to as a spoolie. It is great for cleaning rough spots on green ware in delicate or hard to reach places.
  • The curved tool has a small sharp blade which is great for removing small areas with straight edges. The angled end is great for cutting small detailed areas.
  • The angled tool is invaluable for flattening areas in hard to reach places. The needle point can create small holes, texture marks or can assist in placement of small objects.
  • Use the slightly forked end to create wood like texture or sgraffito effects. Spearhead ends cuts small straight lines and etches fine details.
  • The curved blade with the flat end lifts small areas with straight edges. Use the slightly forked end to create wood like texture or sgraffito effects.
  • The curved blade cuts, carves and smoothes clay. The large spearhead blade is great for deepening details and making longer cuts.
Add to wishlist
Add to cart
Quick view
Compare

Plaster of Paris Signature 1kg

KSh450.00
  • 1kg.
  • Designed for casting, moulding and sculpting.
TIPS
  • For mixing, we suggest approximately 1 part water to 2 parts plaster, however this will vary with temperature of water used and prevailing weather conditions.
  • Never use bare hands to mix or stir plaster.
  • Water should always be added to the mixing tray first then sprinkle or sift plaster into the water in small quantities and gently mix with spatula. Tap sides to vibrate and release air bubbles. When mixture is a smooth, even consistency and a uniform light grey colour it is ready to pour into mould.
Add to wishlist
Add to cart
Quick view
Compare

Plaster Cloth Wrap Signature 10cm x 4.6m

KSh350.00
  • 10cm x 4.6m (3.9in x 14.8ft)
  • Can cover any form
  • Creates masks and sculptures
TIPS
  • Cut your strips to size, dip into warm water and apply to wire frames, cores or models.
  • Build up the layers until you are happy with the strength of your project.
  • Once dry, sand and paint. Setting times will vary due to thickness. When dry you can even try adding clear acrylic to make it water resistant.
Warning - Harmful if swallowed. May cause irritation. Avoid breathing vapours, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin and clothes. Wash thoroughly after handling.
Add to wishlist
Add to cart
Quick view
Compare

Air Hardening Modelling Clay Premium 500g- Terracotta

,
KSh450.00
Mont Marte Premiu, Air Hardening Clay is the perfect choice for professional modellers, artists and students alike. This heavy bodied
Add to wishlist
Add to cart
Quick view
Compare

Air Hardening Modelling Clay Premium 500g – Grey

,
KSh450.00
  • Fine even texture ideal for free form sculptures
  • Ideal for art, professional modelling and craft projects
  • Clay block size great for medium-scale projects
  • No baking needed, dries in 24hrs approx. (depending on thickness) to earthenware hardness
  • Dries to a grey, matte finish
  • Air dry clay can be sanded, drilled, painted or varnished once dry
  • Resealable sticker included to help keep clay fresh

Handy hints

  • Knead modelling clay before use
  • Make sure your work surface is smooth
  • To join large portions of clay, score both surfaces and dampen with slip (water)
  • Cover your project with cling film and a damp tea towel between sessions and store in a cool, dry place within an airtight container
  • Wash your tools with water straight after use
  • Dry clay cracks can be patched with wet clay
  • To speed drying time use a hairdryer

Techniques:

  • Soil
  • Slab
  • Pinch
  • Score
  • Weld
Add to wishlist
Add to cart
Quick view